Download Print this page

Remington HC-1000 Use And Care Manual page 2

Advertisement

How to Use
Giving a Comfortable,
Before Cutting Hair
To Attach Trimming Guides
Even Cut
1. Make sure your hair clipper is
1. Select the trimming guide that
Allow the clipper to cut through the
running smoothly, with a slight
matches the length you want
hair without moving it too quickly.
vibration.
the hair to be after the cut. The
Moving the clipper too quickly may
trimming guides are numbered
2. Place a cape around the neck of
create a pulling sensation.
and marked with 1/8" (3mm), 1/4"
the person whose hair is being
Use short strokes when cutting, and
(6mm), 3/8" (9mm), 1/2" (12mm),
trimmed or cut. (A cape is provided
initially use the longest trimming
5/8"(16mm), 3/4"(18mm), and
with model HC-2000).
guide. You can always use a closer
1"(25mm). See preceding chart
3. This person should be seated so
trimming guide later if you want a
to determine which combs your
that the top of their head is at your
closer cut.
model contains.
eye level.
2. While the clipper is off, hold the
4. Comb the hair as it is normally
How to Give a Haircut
trimming guide with the teeth up.
styled.
Slide the trimming guide onto the
1. Start at the back of the head.
5. Comb out all knots and tangles.
blades until it locks into place.
Holding the clipper as shown,
6. Ensure the hair is dry. Hair clippers
lightly stroke upward making sure
perform best with dry hair, making
you are taking off the desired
it easier to see how much hair is
amount of hair. Work your way
being cut.
up to the crown of the head in
layers. When
7. Hold the hair clipper in the palm of
completed,
one hand with your thumb resting
comb the area
firmly on the top of the hair clipper.
to remove any
This grip provides comfortable
loose hair and
cutting control. Although the hair
to determine
clipper may be used with the left
whether you
or right hand, using it right-handed
need any
allows you to access the taper
further cutting.
lever more easily.
Usage Tips
2. Repeat the same procedure for
5. The final trim can be made with
each side of the head. Make sure
the hair clipper or the included
the length of the hair is trimmed to
scissors. Make sure to check over
the same length on both sides of
the entire head for any uneven
the head.
areas. For styled hair or giving
quick trims, you may prefer using
3. To cut the hair
your hair clipper without the
at the top
trimming guide.
of the head,
hold the hair
6. The adjustable taper control lever
between your
allows you to gradually change
fingers and
the closeness of your cut, either
cut a small
with or without a trimming guide.
amount at a
When the lever is fully forward the
time. Cut from
blades will give you the closest
the front to
cut. Moving the lever gradually
the back.
backward increases the cut length.
(A taper lever is provided on
4. Remove the
models HC-1050 and HC-2000)
trimming guide
and replace
with either the
left or right
ear guide.
The shorter
guide teeth are
designed to be
toward the ear.
Move the clipper from the back of
the head to the front. This creates a
tapered effect around the ears and
back of the neck.
Very short styles
Trimming Beards &
the longest. If you want a longer
Mustaches
beard you can use the comb as a
1. Using the
trimming guide.
1/2" (12mm)
1. Comb your beard in the direction
trimming
3. Start trimming under your chin and
it grows.
guide, hold
work toward your ear and beard
2. Determine
the comb
line. Cut in different directions for a
the length
flat against
uniform trim.
you want
the head and
4. Lightly stroke the edge of your
the beard
move the hair
mustache in a downward
to remain,
clipper from
movement.
and fit the
the back of
appropriate
the neck to
trimming
Maintenance
the crown of the head.
guide.
2. Cut in a similar manner from the
■ Do not wrap the cord around the
Remember
side to the top of the head. Then
appliance.
the 1/8" (3mm) guide will give you
cut from the front to the crown of
the shortest beard while the 1/2"
■ This appliance does not contain
the head.
(12mm) or 1" (25mm) will give you
any user-serviceable parts.
3. If a "Flat Top" style is desired,
remove the trimming guide and
Performance Guarantee
use the barber's comb. Trim a
little at a time until a flat look is
achieved.
Performance Guarantee
Spectrum Brands, Inc. Money-Back Offer
If within 30 days after you have purchased your Remington
not satisfied with it and would like a refund, just return it, together with the sales
receipt, to the retailer from whom it was purchased. Spectrum Brands, Inc. will
reimburse all retailers who accept such appliances within 30 days from date
of purchase. If you have any questions regarding this money-back guarantee,
please call 800-736-4648 in the U.S..
Limited Five-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for a five-year period from the original date of
consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will
replace it free of charge. Return your product with your name, address and day
time phone number to: Remington Returns Center, 507 Stokely Dr., Deforest, WI
53532. For more information call 800-736-4648 in the U.S.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or mainte-
nance of this product.
SPECTRuM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQuENTIAL DAMAGES RESuLTING FROM THE
uSE OF THIS PRODuCT. ALL IMPLIED WARRANTIES, INCLuDING BuT NOT
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DuRATION TO FIVE YEARS FROM DATE OF ORIGINAL PuRCHASE.
Remington Guarantees Satisfaction After 30 Days!
Remington Men's Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
branded Men's Shave and
®
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call 800-
736-4648 in the US or 800-268-0425 in Canada.
**Terms and conditions apply.
Terms and Conditions
®
product, you are
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington branded Men's Shave and Groom
product:
a. The Remington product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
*Applies to US and Canadian customers' returns only.
This warranty gives you specific legal
Questions or comments:
rights, and you may also have other
Call 800-736-4648 in the U.S. or
rights that vary from state to state.
visit RemingtonProducts.com
Some states do not allow the exclu-
sion or limitation of incidental or con-
® Registered Trademark of
sequential damages, or limitations on
Spectrum Brands, Inc. (SBI), or one
how long an implied warranty lasts,
of its subsidiaries.
so the above limitations and exclu-
sions may not apply to you.
© 2013 SBI
Job # 2013-5-28-156
U.S. residents: To order accessories,
6/13 Part No. T22-29992
contact us at 800-392-6544, visit us
at RemingtonProducts.com, or
Dist. by: Spectrum Brands, Inc.
visit your local retailer.
Madison, WI 53711
KEEP ORIGINAL SALES RECEIPT
Made in China.
AS PROOF OF PURCHASE FOR
WARRANTY PURPOSES.
120VAC, 60Hz

Advertisement

loading

This manual is also suitable for:

Hc-1050Hc-2000Hc-2000b