Quick Installation Guide
AC1750 Wireless Dual Band DOCSIS 3.0
Cable Modem Router
7106505264
REV1.0.1
Power adapter
Internet
1
Connect the coaxial cable
to the modem router.
4
Wait about 15 minutes for the modem router to
synchronize with the Internet service provider's (ISP)
server and make sure the following LEDs are on.
Power: Solid
Downstream: Solid
Upstream: Solid
Online: Solid
Wireless: Solid
Note: Please leave the Archer CR700 powered on at
all times during this process.
Connect to the Internet
Archer CR700
2
Power on your
modem router.
5
Contact your ISP (Comcast, Time Warner Cable, COX,
Charter, Cablevision and so on) to activate the Archer
CR700. During activation, you will need your account
information, the serial number and MAC address which
can be found on the product label of the modem router.
Note: If your ISP is Comcast, you can activate as follows:
1. Open a web browser. You should be automatically
redirected to the Comcast Xfinity Activation page.
If not, go to www.comcast.com/activate.
2. Follow the on-screen instructions to activate the Archer
CR700. Make sure you have your account information
ready.
If you are unable to activate your modem router, call
Comcast Xfinity customer service at 1-800-XFINITY
(1-800-934-6489).
Wired: Using an Ethernet cable.
3
Connect to
the computer.
Wireless: Using the default
SSID (Network Name) and
Wireless Password printed on
the product label at the bottom
of the Archer CR700.
Model:Archer CR700
S/N:XXXXXXXXXXXXX
MAC:XXXXXXXXXXXX
Wireless Password/PIN:XXXXXXXXX
SSID:TP-LINK_XXXX
SSID:TP-LINK_XXXX_5G
E470610
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
6
Test your Internet connection using a web browser and
type in a valid URL (for example, http://www.tp-link.com).
http://www.tp-link.com
Note: If the Internet is not accessible, contact your ISP and
make sure that the Archer CR700 is activated.
For additional and more advanced configuration, log in to the
web-based management at tplinkmodem.net or 192.168.1.1,
and enter admin (all lowercase) for both username and
password.
ver:1.0
FCC ID:TE7CR700V1
Enjoy!