Advertisement
Network / PoE Detection
Power on the Net Prowler.
•
Connect the Net Prowler to a switch
•
or active network jack.
Use the left or right arrow buttons to
•
select the Network/PoE icon
and press the enter button or
press the Network/PoE
soft key
The Net Prowler will automatically detect and display link capability, connection
•
speed, PoE class, and PoE Min/Max voltages.
To perform a Network Test only, press the PoE soft key
•
To save the PoE data, press the Save soft key
•
Use the arrow buttons and the enter button to name the PoE file.
•
Press the Save soft key to save the PoE file.
•
Link Light
Power on the Net Prowler.
•
Connect the Net Prowler to an
•
active network cable or port.
Press the Network/PoE soft key
•
soft key
The Link Light will automatically begin
•
upon entering the Link Blink menu.
The Link LED above the LCD screen will flash at the same cadence as
•
the port light.
Use the up and down arrows to adjust the transmit frequency to suit
•
the switch characteristics
.
then press the Link Light
.
.
.
7
Advertisement
