Network / PoE Detection
•
Power on the Cable Prowler.
•
Connect the Cable Prowler to a switch or active network jack.
•
Use the left or right arrow buttons to select the Network/PoE icon
and press the enter button or press the Network/PoE soft key.
•
The Cable Prowler will automatically detect and display link capability,
connection speed, PoE class, and PoE Min/Max voltages.
•
To perform a Network Test only, press the PoE soft key.
•
To save the PoE data, press the Save soft key.
•
Use the arrow buttons and the enter button to name the PoE file.
•
Press the Save soft key to save the PoE file.
Link Light
•
Power on the Cable Prowler.
•
Connect the Cable Prowler to an active Network cable or port.
•
Press the Network/PoE soft key
•
The Link Light will automatically begin upon entering the Link Blink menu.
•
The Link LED above the LCD screen will flash at the same cadence as the
port light.
•
Use the up and down arrows to adjust the transmit frequency to adjust the
link light cadence.
www.platinumtools.com
then press the Link Light soft key.
5