Tone Generator - Platinum Tools Net Prowler TNP700 Quick Start Manual

Tone Generator

Power on the Net Prowler.
•
Use the left or right arrow buttons to select the tone generator icon and
•
press the enter button.
The Net prowler will automatically activate the tone generator upon entering the
•
tone generator menu.
Connect your cable to either the RJ45 jack or coax connector located on the top
•
of the Net Prowler.
To switch between network and coax cables, press the coax cable/RJ45 soft key
•
/
Press the up or down arrow buttons to select tone cadences 1 thru 4.
•
Press the left or right arrow buttons to select which pin or pair to place the tone.
•
Use a tone probe alongside the cable or at the end of the cable to hear an
•
audible tone.
6
.
Net Prowler Quick Start Guide