Advertisement
1
Connect to a Computer
Connect the adapter to a USB port on your
computer using the USB cable provided.
For Windows
Note:
In Windows XP, a Found New Hardware Wizard window
will appear when the adapter is detected. Please click
Cancel.
This USB Adapter can only be powered by computers that comply with
Limited Power Source (LPS).
2
3
Install Driver and Utility
Join a Wireless Network
Insert the CD and run the Autorun.exe
Option 1:
a.
from the pop-up Autoplay window.
Click
Notes:
select your Wi-Fi network, and click Connect.
1. You can also download the driver and utility at
www.tp-link.com.
Note: In Windows XP, you need to close the TP-LINK Utility
2. In some operating systems, the CD screen will pop
before using the Windows Wireless Utility.
up automatically. Otherwise, run the CD manually.
b.
Select Archer T4UHP and click Install Driver,
then follow the InstallShield Wizard to
complete the installation.
Setup Wizard
Archer T4UHP
Install Driver
User Guide
Browse CD
EXIT
Via Windows Wireless Utility
Option 2:
Via TP-LINK Utility
or
( Network icon) on the task bar,
Select your Wi-Fi network from the utility window and
click Connect. The symbol
connection.
Networks
Wi-Fi
TP-LINK_TEST_Device
Status
WPS
Network Name(SSID)
TP-LINK_0969
TP-LINK_XXXX
TP-LINK_XXXX
TP-LINK_0969
√
Connect automatically
Connect
TP-LINK_TEST_Device
Option 3:
Via Wi-Fi Protected Setup (WPS)
a. Press the WPS button on your router.
indicates a successful
b. In 2 minutes, press and hold the WPS button on
the adapter until the configuring screen appears.
Network
Profile
Advanced
Security
Channel
Signal
WPA/WPA2-Personal
6 (2.4G)
Connect automatically
Connect
c. When you are prompted "Successfully connected
WPA/WPA2-Personal
2 (2.4G)
to the network by WPS!", click OK.
None
149 (5G)
Network Na
TP-LINK_XXXX
For more information, please visit our website
TP-LINK_0001
http://www.tp-link.com
©2016 TP-LINK
Advertisement
