Antelope Orion32+ Owner's Manual page 15

3. 'MP32 detected' display (indicates if an MP32 unit is connected to your Orion32+)
4. Meter Source display (dropdown tab allows you to select different sources to preview)
5. Clock Source
This dropdown menu allows you to select how the Orion32+ is to be synchronized. Select
Oven/10M for internal sync (with or without atomic clock reference), W.C. (Word Clock) to sync
the Orion32+ to an external device through the Word clock input, or MADI, ADAT, S/PDIF for
syncing with incoming digital signals.
Once Atomic Clock is connected it replaces 'Oven' in the Clock Source dropdown menu.
Orion32+ supports sample rates higher than 48kHz for MADI and ADAT and also supports S-Mux.
The following tables show what the various options for MADI and ADAT implement in order to be
consistent with the input/output of your other devices connected via MADI or ADAT.
Clock Source MADI Options (with or without the S-Mux option selected in Settings):
Clock Source Mode
MADI
MADI 2X
MADI 4X
Clock Source ADAT options: (Note that there is no S-Mux check-box for ADAT as it is
automatically enabled when you select ADAT 2X or ADAT 4X):
Clock Source Mode
ADAT
ADAT 2X
ADAT 4X
6. Sample Rate select
7. Lock light
8. Presets
9. Settings
MADI Configuration
Sample Rate
44.1 kHz
48 kHz
88.2 kHz
96 kHz
176.4 kHz
192 kHz
ADAT Configuration
Sample Rate
44.1 kHz
48 kHz
88.2 kHz
96 kHz
176.4 kHz
192 kHz
13
Channels
64 ch
64 ch
32 ch
32 ch
16 ch
16 ch
Channels
8 ch
8 ch
4 ch
4 ch
2 ch
2 ch