Page 2
General Service Instructions Models 125 and 150 Recorders To Remove Case Cover IMPORTANT NOTES 1) Turn key one quarter turn clockwise. 1) The date setting (if so equipped) MUST 2) Lift case cover up then forward. be manually reset to the first of the 3) Reverse procedure to replace cover.
Page 3
To Change Ribbon A replacement Acroprint Ribbon is supplied on two spools. When ordering specify 20-106-002 for two-color right margin print recorder, 20-106-000 for two-color left margin print recorder, or 20-0106-003 for solid blue ribbon. To replace the ribbon, perform the following steps.
Page 4
Installing the Time Recorder Unpacking and Inspection Wooden/Plywood Walls Carefully unpack your recorder and inspect it for You may use the three screws included with the any damage. Verify that the following accessories recorder to mount the recorder. Install a screw in are included: three mounting screws, a case lock the wall 53"...
Need help?
Do you have a question about the 125 and is the answer not in the manual?
Questions and answers