Advertisement
Quick Links
GENERAL INFORMATION
CAUTION: For your safety and to prevent damage to the machine, we recom-
mend that you remove the line cord from the wall receptacle when setting or
replacing the ribbon.
For repairs, please contact your authorized Acroprint dealer.
MAINTENANCE
To obtain the best results from your Electric Stamp, we recommend periodic inspections, cleaning,
and lubrication each year by an authorized dealer. For further information contact your dealer or
Acroprint Time Recorder.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own
expense.
MACHINE REFERENCE
Date Purchased __________________________________________________________
Model No. _____________________________ Serial No. _________________________
Key No. ______________________
Dealer _________________________________________________________________
Address ________________________________________________________________
City _____________________________ State ____________ Zip __________________
Phone No. ____________________________________
5640 Departure Drive
Raleigh, NC 27616-1841 USA
IN USA 800.334.7190
919.872.5800
www.acroprint.com
06-0103-001 Rev N
HEAVY-DUTY DOCUMENT
CONTROL STAMP
USER MANUAL
5640 Departure Drive
Raleigh, NC 27616-1841
919.872.5800
In USA: 800.334.7190
Fax: 919.850.0720
Email: sales@acroprint.com
www.acroprint.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Acroprint HEAVY-DUTY DOCUMENT CONTROL STAMP
Summary of Contents for Acroprint HEAVY-DUTY DOCUMENT CONTROL STAMP
-
Page 1: User Manual
USER MANUAL For repairs, please contact your authorized Acroprint dealer. MAINTENANCE To obtain the best results from your Electric Stamp, we recommend periodic inspections, cleaning, and lubrication each year by an authorized dealer. - Page 2 We suggest you record the above information in the information reference section on the back page, making sure to list your key number. Before operating your Acroprint Heavy Duty Document Control Stamp, please FIGURE 8 read these instructions completely. optimum performance, do not plug...
- Page 3 Pivot Ribbon Drive Assembly Upward or Downward CAUTION: FIGURE 3 Upper Tie Bar Be sure the machine is disconnected from the wall outlet when setting Typewheels typewheels. FIGURE 6 SETTING The stamp has a typehead with 6 or more typewheels which print information such as year, month, date, etc.
- Page 4 ADJUSTABLE PRINT IMPACT CONTROL When the printing becomes light, change the ribbon. Using other The Stamp has an adjustable Print than authorized Acroprint ribbons may result in the ribbon not Impact Control (see Figure 5). advancing or reversing properly. • Turning the knob clockwise increases the impact, turning the knob counterclockwise lowers the impact.
Need help?
Do you have a question about the HEAVY-DUTY DOCUMENT CONTROL STAMP and is the answer not in the manual?
Questions and answers