Table of Contents
Advertisement
6-5.
System Lock / unlock & Sleep mode / wake up
If the Lock Enable parameter is set to 'Yes', the system can be locked by
pressing the power button for more than 4 seconds.
To lock the DX System
Press the power button for 4 seconds when the DX System is turned on.
The DX System will turn off in a locked state.
To unlock the DX System
Press the power button.
The AJR will show a lock on the display.
Press the horn button twice within 10 seconds.
The DX System will turn on normally.
Sleep mode
If the Sleep Mode Enable parameter (see DSM 5.3.9.8) is set to 'Yes', the
DX System will go to sleep after a period of inactivity. This period can be set
with the Sleep Timeout parameter (see DSM 5.3.8.5). When the DX System
sleeps, it is partially turned off to reduce energy consumption.
To wake up the DX System
Press any button on the AJR, or, if the Enable Joystick Wakeup parameter
(see DSM 5.3.9.10) is set to 'Yes', move the joystick.
The DX System will turn on.
22
Advertisement
Table of Contents
