Battery And Control Box Connection; Battery Charge - Karman Healthcare XO-505 Instruction Manual

6-2. Battery and Control Connection
The main electrical control system is composed of motor, Control box battery and controller.
The connection of control system as below.

6-3. Battery Charge

1. First, the battery charger line connect to the battery DC power socket and make sure the line is
right connect.
2. Connect the AC power line to the AC socket.（110~230V）
3. The light of battery charger from yellow color become green color and represent the battery
charge in finish.
Battery full
Battery almost full
Battery half full, drive towards a charger
Battery low, recharge soon
Battery almost empty, recharge now
Battery empty, recharge immediately
※ When the battery capacity is empty power, it will stop working.
（Fig-34）
20
34