Innovative Technology ITCDS-5000 Manual page 12

if other remote control devices using infrared rays are used near the unit, it may operate
incorrectly. Conversely, the other appliances may operate incorrectly.
TO ACTIVATE THE REMOTE CONTROL:
The remote control is built with cell battery before
shipment. To activate the battery, remove the transparent
plate at the bottom of the remote control.
Now the remote control is ready to use.
BATTERY REPLACEMENT: If the distance required between the remote control unit and main unit
decreases, the battery is exhausted. In this case, please replace the battery with new one.
TO REPLACE WITH A NEW BATTERY:
1. Remove the battery compartment cover as per
illustration on the right.
2. Observing the correct polarity and put a 3Vdc lithium
battery (CR2025, not included).
3. Close the cover.
Battery Precautions:
•
Be sure to insert the battery with correct positive + and negative - polarities.
•
Refer to the precautions on the battery labels.
•
When the remote control unit is not to be used for a long time (more than a month), remove
the battery from the remote control unit to prevent it from leaking. If it leaks, wipe away the
liquid inside the battery compartment and replace the battery with new one.
•
Do not heat or disassemble batteries and never dispose of old batteries by throwing them in
a fire.
1