Table of Contents
Advertisement
10
Adjusting the Projected Image
Adjusting the Height of Projected Image
To raise the image:
1
Press the elevator foot release. (Illustration #1)
2
Raise the image to the desired height angle (Illustration #2), then release
the button to lock the elevator foot into position.
3
Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.
To lower the image:
1
Press the elevator foot release. (Illustration #1)
2
Lower the image to the desired height angle (Illustration #2) , then release
the button to lock the elevator foot into position.
3
Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.
3
Tilt adjusting wheel
1
Elevator foot
release button
2
Elevator foot
3
Tilt adjusting wheel
Advertisement
Table of Contents
