System Agent (Sa) Configuration - Asus TUF Z370-PLUS GAMING Manual

Hide thumbs Also See for TUF Z370-PLUS GAMING:
Table of Contents

Advertisement

Turbo Mode
This item allows you to automatically set the CPU cores to run faster than the base
operating frequency when it is below the operating power, current and temperature
specification limit.
Configuration options: [Disabled] [Enabled]
CPU C-States
This item allows you to set the power saving of the CPU states.
Configuration options: [Auto] [Disabled] [Enabled]
CFG Lock [Enabled]
This item allows you to disable or enable the CFG Lock.
Configuration options: [Enabled] [Disabled]
3.6.3

System Agent (SA) Configuration

The items in this menu allow you to adjust the Link Speed for PEG Port and Multi-Monitor.
Vt-d
Allows you to enable the virtualization technology fundtion on the memory controller hub
(MCH). Configuration options: [Enabled] [Disabled]
Above 4G Decoding
Allows you to enable or disable the above 4 G Address Space (Only if System Supports 64bit
PCI Decoding). Configuration options: [Enabled] [Disabled]
Graphics Configuration
Allows you to select a primary display from CPU, PCIE and PCI graphical devices.
Primary Display
Allows you to select the primary display from CPU, PCIE and PCI graphics devices.
Configuration options: [Auto] [CPU Graphics] [PCIE]
iGPU Multi-Monitor
This item allows you to empower both integrated and discrete graphics devices for the
multi-monitor output. The CPU graphics shared system memory size is fixed at 64 MB.
Configuration options: [Disabled] [Enabled]
RC6(Render Standby)
Allows you to enable or disable Intel
iGPU power use when the system is idle. Configuration options: [Disabled] [Enabled]
DVMT Pre-Allocated
Allows you to select the amount of system memory pre-allocated to DVMT 5.0 used by
the internal graphics device. Configuration options: [32M] [64M] [96M] [128M] [160M]
[192M] [224M] [256M] [288M] [320M]~ [480M] [512M] [1024M]
DMI/OPI Configuration
This item allows you to control various DMI (direct media interface) to run at PCI-E 2.0 speed.
DMI Max Link Speed
Allows you to configure the DMI speed. Configuration options: [Auto] [Gen1] [Gen2]
[Gen3]
3-24
Graphics Render Standby support to reduce
®
Chapter 3: BIOS Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents