Pch Configuration; Pch Storage Configuration - Asus TUF Z370-PLUS GAMING Manual

Hide thumbs Also See for TUF Z370-PLUS GAMING:
Table of Contents

Advertisement

PEG Port Configuration
Allows you to configure the PEG Port settings.
PCIEx16_1 Link Speed
Allows you to configure the PCIEx16 speed for slot 1. Configuration options: [Auto]
[Gen1] [Gen2] [Gen3]
Memory Configuration
Allows you to configure the memory configuration parameters.
Memory Remap
Set this item to [Enabled] to support DRAM address remapping for 64-bit operating
systems. Configuration options: [Enabled] [Disabled]
3.6.4

PCH Configuration

The items in this menu allow you to adjust the PCH PCI Express speed.
PCI Express Configuration
This item allows you to configure the PCI Express slots.
IOAPIC 24-119 Entries
This item allows your system to enable or disable IOAPIC 24-119 Entries.
Configuration options: [Disabled] [Enabled]
3.6.5

PCH Storage Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
SATA Controller(s)
This item allows you to enable or disable the SATA Device.
Configuration options: [Enabled] [Disabled]
SATA Mode Selection
This item allows you to set the SATA configuration.
[AHCI]
[Intel RST Premium With
Intel Optane System
Acceleration (RAID)]
ASUS TUF Z370-PLUS GAMING
Set to [AHCI] when you want the SATA hard disk drives to
use the AHCI (Advanced Host Controller Interface). The AHCI
allows the onboard storage driver to enable advanced Serial
ATA features that increases storage performance on random
workloads by allowing the drive to internally optimize the order
of commands.
Set to [RAID] when you want to create a RAID configuration
from the SATA hard disk drives.
3-25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents