Lacerta M-Gen User Manual page 30

Display settings screen
5.1.4.1
The LCD and LED indicators' settings are here:

LCD backlight
The intensity of the LCD backlight brightness. The value is used in application mode
of the device, the LCD backlight is always on full in update mode.

contrast
: (decimal, 0...9) global
Contrast for the LCD. By default it is 5 and is optimal in most of the cases.

Indicators' setup
Here You can set the LED's brightness for each color
(function). On this screen every LED will be lit to check their
brightness in place.
Currently the indicated events or states are constant, can't be changed:
 ESC (blue):
 SET (green):
 directions (red): the RA autoguiding signals horizontaly (left-right), the
DEC signals vertically (up-down).
Each brightness can be next to the
Idle bright mean the value to be used (for all the indicators) when they are not active.
Mode settings screen
5.1.4.2
Here are some switches for the behaviour of
the functional units. These are:

AstroTimer mode
Used to cooperate with AstroTimer shutter controller unit. If enabled, the
Autoexposure and so the EOS shutter output signals behave differently. The decription
of this mode see 4.2.

Exclusive AG out
Meaning of the item: "exclusive AutoGuiding output signals for the axes". If enabled,
only one axis is signalled for correction at a time. If the device wants to signal both
axes, the RA will be signalled first and the DEC after then, in other words the RA axis
is in priority to the DEC.
: (decimal, 0...99 %) global
: (submenu)
shutter focus line active
shutter exposure
bright
: (switch) profile
: (switch) profile
- 30 -
line active
item in percentage of the full light.