Autoexposure Program List Screen - Lacerta M-Gen User Manual

Below there are some example diagrams for the running of the AE program in different
cases. (Time axis is the horizontal line.)
 Operation without ML ("mirror lockup" = 0.0)
Exposure line
 Operation with ML
Events
AE state
Exposure line
Focus line
 Operation without ML but with enabled Random Displacement
Events
AE state
Exposure line
Focus line
With ML the case is almost the same because ML can be interpreted as a part of the
„exposure" state.
See more in 4.5 about extra waiting due to RD.
5.1.2 AutoExposure program list
screen
Here You can change or check the current AE
program slot and its mode, or start a multi-type
exposure program set.
From fw. 2.03, there are 4 individual AE
program slots. (Below 2.03, it's like there was only the 1
Events „Start"
AE state
wait
Focus line
1 sec
0.3 sec
„Start"
wait ML
1 sec
ml. sec
0.5 sec
Req. new New
position position set
wait
1 + ? sec
expo. wait
exp sec wait sec
expo. wait
exp sec wait sec
Req. new
position
expo. wait
exp sec wait + ? sec
st
slot.) Each has its own settings, like
- 24 -
...
expo.
exp sec
ML expo.
ml. sec exp sec
New
position set
expo.
exp sec
...
...