QUAD 66 Instruction Manual page 2

IMPORTANT
Do not use unshrouded IEC connectors
with this equ.ipment.
These can be incorrectly inserted into
moated AC power outlet sockets, possibly
causing a safety hazard.
BRIEF OPERATING INSTRUCTIONS
Fit the PP3 battery supplied into the control panel.
Connect the preamplifier to the AC power supply with the
mains cable supplied (fit suitable mains plug).
Connect power and signal cables (supplied with the amplifier)
to the Quad power amplifier. Connect input sources.
O
Switch preamplifier on with the ON/OFF switch.
O
Use the CONTROL PANEL to select the required
sound source.
O
Adjust VOLUME and BALANCE as required.
O
Set TILT, BASS STEP and FILTER if necessary.
O
When you have finished listening use the
STAND-BY button to switch off.
O
To switch on again, from STAND-BY, just press
STAND-BY or any INPUT SELECTOR button.
O
The Quad CD player and 66FM tuner can be operated
via the CD FUNCTION buttons.
O
For more details on the operation of the 66 preamplifier
please refer to the main instruction book.
IMPORTANT NOTE
It is always good practice to switch off equipment before connecting
or disconnecting signal leads. This will prevent unpleasant and loud
noises coming from the loudspeakers and avoid the risk of damage to
equipment.
It is also important that equipment is earthed according to the
manufacturers instructions. This becomes more important as the
number of units which are connected together increases.
I
i
I
I