Table of Contents
Advertisement
Product Manual
Back View
Quick Guide to Motion Sensing TV Controller
Connect with TV Box with a USB dongle
The USB dongle is stored at the battery container of the device. Uncover the batter
container in the back, take out the dongle and plug it into the TV box intended to
connect with.
Turn ON/OFF
Turn on the control device. Power ON/OFF switch is on the back of the controller, switch
ON or OFF to turn on or off the control device, respectively.
Power On
Keep the device to face-up position and stable for a few second till the led indicator
lights on in blue. The led indicator will stay on in blue light for 30 seconds, if it is turn on
properly.
Pairing
If the pairing key is pressed accidentally, the led indicator will flash in red for 60 seconds.
Smart TV Controller-3D Motion Sensing
Advertisement
Table of Contents
