Led Light Indicator - Jands JS-B001 Product Manual

Product Manual

Led Light Indicator

The dual colored LED indicator (Red/Blue) is located in the upper front of the controller. The
light indications of different status are described as follows:
Condition
Active Mode (with operations)
Active Mode (with no operation)
Battery level less than 10%
Battery level less than 5%
Charging
Fully charged
Battery level more than 10% & Turn on the
controller
Batter level less than 10% & Turn off the
controller
Connecting manually
Manual connection success
Manual connection failure
Battery level more than 10% & Wake-up
status
Battery level less than 10% & Wake-up status
Mouse Control Function
The controller is built in with a 3D motion sensing engine, a motion capture system used for
input devices. It adopts a 3-axis gyroscope and a 3-axis accelerometer to calculate projected
X and Y displacement, roll angle, rotation intensity and force intensity. By fusing the
gyroscope and accelerometer outputs, an adaptive reduced filter algorithm is also used to
Color
Blue
Red
Red
Blue
Blue
Blue
Red
Blue
Blue
Red
Blue
Red
Total: 8 Led Light Indicator Mode
Smart TV Controller-3D Motion Sensing
Description
Stable blue light
Off
Flash per 0.5 second for five times
with 5 min interval;
One flash every 1 second
Flash every 2 seconds
Stable light until disconnection
Keep flashing for 15 seconds
Flashing for 15 seconds
Rapid flashing every 250ms
Stable light for 5 seconds
Stable light for 5 seconds
Stable light for 10 seconds
Flashing for 10 seconds