Related Manuals for Signotec Sigma
Summary of Contents for Signotec Sigma
- Page 1 Signature Pad signotec Sigma User manual signotec GmbH Am Gierath 20 b 40885 Ratingen, Germany +49 (0) 2102 53575 - 10 www.signotec.com info@signotec.de Version 1.4 as of May 8, 2018...
-
Page 2: Table Of Contents
USB connection DJUSTING THE BRIGHTNESS 6 SENSOR CALIBRATION 7 PEN AND PEN HOLDER HANGE CARTRIDGE 8 GENERAL SAFETY NOTES 9 MAINTENANCE AND CLEANING 10 SUPPORT – CONTACT © 2000 - 2017 signotec GmbH User manual signotec Sigma Page 2 of 10... - Page 3 GmbH based in Ratingen, Germany. The reproduction of this documentation, in part or in whole, is subject to prior written approval from signotec GmbH. All hardware and software names used are trade names and/or trademarks of their respective manufacturers/owners.
-
Page 4: Thank You
The LCD Signature Pad signotec Sigma was designed for the use in an office- or at the counter- environment and was tested in exactly these operating settings. The use of the device in other fields of application may damage it and is undertaken entirely at the user’s own risk. -
Page 5: Product
Ergonomic special pen with changeable cartridge and pen holder Status LED (= Light- Emitting Diode)/control lamp LCD (= Liquid Chrystal Display) Cord USB-Cable (fixed installed) Back view Cord USB Cable (fixed installed) Pen holder © 2000 - 2017 signotec GmbH User manual signotec Sigma Page 5 of 10... -
Page 6: Bottom View
Bottom View Pen holder USB cable (fixed installed) Nameplate with device name and serial number Mounting holes Cord © 2000 - 2017 signotec GmbH User manual signotec Sigma Page 6 of 10... -
Page 7: Access To The Service Menu
Navigate accordingly by using the pen supplied. Connection types The LCD Signature Pad signotec Sigma is available in two different versions* (HID/FTDI). Switching the mode is not possible. 5.1.1 Operation on terminal server or remote desktop (vCOM) (FTDI-version) For operating within a Windows terminal server, remote desktop or Citrix environment signature pads with a serial interface are needed. -
Page 8: Usb Connection
This driver deactivates this function for our signature pads, so that the device is always available. You can find the driver in the download section on www.signotec.com. Adjusting the brightness The configuration of the brightness of the device is carried out via the service menu. -
Page 9: Pen And Pen Holder
Alternatively, the calibration can be carried out via the signoSign/2 application software. Pen and pen holder The signotec pads are equipped with a robust and maintenance-free pen that does not require batteries. With its realistic size, it gives the user an optimal writing experience. The pen can be attached to the pen holder. -
Page 10: General Safety Notes
10 Support – Contact The products and solutions from signotec are designed to make our customers satisfied users. If you should encounter an unexpected problem, you can turn to our support pages for the necessary help and support.
Need help?
Do you have a question about the Sigma and is the answer not in the manual?
Questions and answers