Related Manuals for Signotec Gamma
Summary of Contents for Signotec Gamma
- Page 1 Signature Pad signotec Gamma User manual signotec GmbH Am Gierath 20 b 40885 Ratingen, Germany +49 (0) 2102 53575 - 10 www.signotec.com info@signotec.de Version 1.4 as of April 27, 2017...
-
Page 2: Table Of Contents
USB connection DJUSTING THE BRIGHTNESS 6 SENSOR CALIBRATION 7 PEN AND PEN HOLDER HANGE CARTRIDGE 8 GENERAL SAFETY NOTES 9 MAINTENANCE AND CLEANING 10 SUPPORT – CONTACT © 2000 - 2017 signotec GmbH User manual signotec Gamma Page 2 of 11... - Page 3 GmbH based in Ratingen, Germany. Reproduction of this documentation, in part or in whole, is subject to prior written approval from signotec GmbH. All hardware and software names used are trade names and/or trademarks of their respective manufacturers/owners.
-
Page 4: Thank You
The LCD Signature Pad signotec Gamma was designed for the use in an office- or at the counter environment and was tested in exactly these operating settings. The use of the device in other fields of application may damage it and is undertaken entirely at the user’s own risk. -
Page 5: Product
Special Pen (ER-Technology) LED (= Light- Emitting Diode)/control lamp LCD (= Liquid Chrystal Display) Cord Back view Cord Attachment for second pen holder (included) USB cable pen holder © 2000 - 2017 signotec GmbH User manual signotec Gamma Page 5 of 11... -
Page 6: Bottom View
Bottom view Attachment for second pen holder (included) USB cable Nameplate with device name and serial number © 2000 - 2017 signotec GmbH User manual signotec Gamma Page 6 of 11... -
Page 7: Access To The Service Menu
Connection types The LCD Signature Pad signotec Gamma can be operated in two different modes (depending on the purchased version* with/without the FTDI Chip). The two modes are vCOM and USB. By default, the LCD Signature Pad signotec Gamma comes pre-configured for the use in serial mode (vCOM). -
Page 8: Usb Connection
HID mode. After a successful installation process, you may check if the device is listed in your device manager. If the LCD Signature Pad signotec Gamma does not appear in the device man- ager, you need to repeat the driver installation. -
Page 9: Adjusting The Brightness
Also tap the center of these lines briefly which completes the calibration. The pad restarts instantly. Alternatively, the calibration can be carried out via the signoSign/2 application software. © 2000 - 2017 signotec GmbH User manual signotec Gamma Page 9 of 11... -
Page 10: Pen And Pen Holder
Pen and pen holder The signotec pads are equipped with a robust and maintenance-free pen that does not require batteries. With its realistic size, it gives the user an optimal writing experience. The pen can be attached to the pen holder. -
Page 11: Support - Contact
10 Support – Contact The products and solutions from signotec are designed to make our customers satisfied users. If you should encounter an unexpected problem, you can turn to our support pages for the necessary help and support. If you need technical assistance, we are pleased to offer telephone support or check the problem...
Need help?
Do you have a question about the Gamma and is the answer not in the manual?
Questions and answers