TRU Audio RM-12 User Manual

RM-12
This powered subwoofer leaves nothing to be
desired. The RM-12 uses a robust, 500 watt, black
anodized aluminum woofer, driven by a powerful
A/B amplifier built exclusively for this cabinet and
driver array.
The RM-12 sounds fantastic with all TruAudio
architectural speakers, making combining different
models in an AV system simple. Additional speak-
ers can be added to a system with the confidence
that the speakers will remain balanced. With over 2
years of engineering and testing, the RM-12 com-
pletes the TruAudio theater package.
Contents
The RM-12 includes: Subwoofer cabinet and grill,
power cord, instruction manual, a warranty card,
and (4) heavy-duty plastic feet attached to the
bottom of the cabinet.

Unpacking and Inspection

Inspect your subwoofer immediately upon opening
for any kind of damage. If for some reason damage
has occurred, please contact your Dealer or TruAu-
dio immediately. We recommend that you retain the
packaging in case a need arises for you to transport
your speaker.
CAUTION: DO NOT OPEN THE SUBWOOFER. THIS
WILL VOID THE WARRANTY.
To reduce the risk of electrical shock and fire, do not
remove the amplifier panel from the back of the
cabinet or the subwoofer from the front of the
cabinet. There are NO fuses or serviceable parts.
All service to this product MUST be done by a
TruAudio Authorized repair center.
Before installing, please read the following
instructions:
• Always turn off the power of your
receiver/preamp and the powered subwoofer
• When turning your amplifier/receiver on, make
sure your volume is turned all the way down
• Never expose the subwoofer to excessive cold,
heat, humidity, or direct sunlight
• This device should never be used in, on or near
water due to risk of fatal shock
• DO NOT attempt to open or dismantle this
subwoofer
• The subwoofer should always have plenty of air
flow to reduce the chance of over heating
User Manual
RM-12
Powered Subwoofer