Download Print this page

Advertisement

Quick Links

RM-15
This powered subwoofer leaves nothing to be
desired. With over 2 years of engineering and
testing, the RM-15 completes the TruAudio theater
package. The RM-15 uses a black anodized
aluminum woofer, driven by a, 1000 watt, powerful
A/B power amplifier built exclusively for this cabinet
and driver array.
The RM-15 is timbre matched to all TruAudio
architectural speakers, making combining different
models in an AV system, simple. Additional
TruAudio speakers can be added to a system with
the confidence that the speakers will remain
balanced.

Unpacking and Inspection

The Red Mountain Subwoofer is carefully packaged
before shipping. Inspect the product immediately for
any kind of damage. If for some reason damage has
occurred, please contact your Dealer or TruAudio
immediately. We recommend that you retain the
packaging in case a need arises for you to transport
your speaker.
The RM-15 includes: Subwoofer cabinet and grill,
power cord, instruction manual, a warranty card,
and (4) heavy-duty plastic feet attached to the
bottom of the cabinet.
CAUTION: DO NOT OPEN THE SUBWOOFER. THIS
WILL VOID THE WARRANTY.
To reduce the risk of electrical shock and fire, do not
remove the amplifier panel from the back of the
cabinet or the subwoofer from the front of the
cabinet. There are NO fuses or serviceable parts.
All service to this product MUST be done by a
TruAudio Authorized repair center.
Before installing, please read the following
instructions:
• Always turn off the power of your
receiver/preamp and the powered subwoofer
• When turning your amplifier/receiver on, make
sure your volume is turned all the way down
• Never expose the subwoofer to excessive cold,
heat, humidity, or direct sunlight
• This device should never be used in, on or near
water due to risk of fatal shock
• DO NOT attempt to open or dismantle this
subwoofer
• The subwoofer should always have plenty of air
flow to reduce the chance of over heating

Subwoofer Placement

Th RM-15 is engineered, designed and built to
reproduce low frequencies at and below 150 Hz.
Frequencies at this level are omni-directional. This
makes it easy to find placement for the sub; howev-
er, there are also several location options that can
either give more or less bass. When placed near a
wall, you will get a louder, deeper bass. Placing the
subwoofer in a corner will produce a high volume of
bass output, while near only one wall will provide
less. Placement away from any wall may not
produce enough bass. Even a slight change of how
the unit sits will alter the bass output. We suggest
trying your subwoofer in different locations to allow
you to hear the difference of bass output and decide
what is best for your room and the listener's
preference.
User Manual
RM-15
Powered Subwoofer

Advertisement

loading
Need help?

Need help?

Do you have a question about the RM-15 and is the answer not in the manual?

Questions and answers

Summary of Contents for TRU Audio RM-15

  • Page 1: Subwoofer Placement

    A/B power amplifier built exclusively for this cabinet subwoofer and driver array. • The subwoofer should always have plenty of air The RM-15 is timbre matched to all TruAudio flow to reduce the chance of over heating architectural speakers, making combining different Subwoofer Placement models in an AV system, simple.
  • Page 2 INPUT CONNECTIONS 1. Left/Right Inputs We suggest to place the subwoofer close to the pair RCA style jacks that will accept standard line level of speakers it will be matched with. For example, if inputs from a pre-amp level source. They will accept the subwoofer is to reproduce bass from the front two a stereo signal and internally combine it into mono.
  • Page 3 the control to a fairly low value at 40, 60, or even of control can be achieved when using the EQ’s 100 Hz. If the main speakers are smaller or do not unique ability to vary the frequency to be affected, have much bass output, set the control higher.
  • Page 4: Specifications

    RM-15 subwoofer auto signal sensing circuit, and will interfere with the quiet enjoyment of your system. Specifications The rst course of action should be trying to make Speaker Type: High-end Powered Subwoofer...