LG LAN-9600R Owner's Manual page 17

When installing the antenna inside the vehicle
(on the dashboard or shelf)
Affix the metallic sheet on as level a surface as possible
where the GPS aerial faces outside the window. Place the
GPS aerial on the metallic sheet. (The GPS aerial is
fastened with its magnet.)
Note
• Make sure the surface is free of moisture, dust, grime, oil,
etc., before affixing the metallic sheet.
• The metallic sheet contains a strong adhesive and may
leave a mark on the dashboard if it is removed.
• Some models use a window glass that does not allow
signals from GPS satellites to pass through. On such
models, install the GPS aerial on the outside of the vehicle.
When installing the antenna outside of the
vehicle (on the body)
Put the GPS aerial in a position as level as possible, such
as on the roof or boot lid.
When routing the lead in from the top of the door
Make a U-shaped loop in the lead on the outside to
prevent rainwater from flowing along the lead into the
interior of the vehicle.
Connecting the Reverse Gear
If using an optional rear view camera, the reverse lead must
be connected.
1. Clamp the reversing lamp lead.
2. Clamp firmly with needle-nosed pliers.
Reverse Extension Code
Reverse lead
Basic operation
Peel off the protective
sheet on the rear.
Reverse lamp lead
17