Install The Battery Of Remote Control; Using The Remote Control - LG LAN-9600R Owner's Manual

Install the battery of remote control

Pull the tray on the back of battery of remote control outward
with a pencil or ball point pen and insert the battery with the
plus (+) minus (-) poles pointing in the proper direction.
1 Remove the battery holder with a pencil or ball point pen.
2 Install the battery on the battery holder.
3 Install the battery holder back into its original position.

Using the remote control

Point the remote control in the direction of the front panel to
operate.
Notes
• Use only one CR2025 (3V) lithium battery.
• Remove the battery if the remote control is not going to be
used for a long period of time.
• Do not leave the product in a hot or humid place.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic materials.
• In the event of battery leakage, wipe the remote control
completely clean and install a new battery.
FLIP TILT
RESET
Reset
If the unit fails to operate properly. press the rest button using
a ball-pen or a similar too.
Basic operation
DISP OPEN
EJECT
13