Table of Contents
Advertisement
III.
Quick Installation Windows 95
This section is for those who are familiar with the hardware
and software installation of PC peripherals, especially PC
compatible sound cards.
III.i
You must already have Windows 95 installed on your com-
puter and running properly before continuing.
1.
Power down your computer, remove the cover and find an
empty 16-bit expansion slot.
2.
Install the <Product> Sound Controller into the open slot
and secure it.
3.
Connect a pair of speakers to the Speaker Out connector
on the <Product> Sound Controller bracket. Refer to Sec-
tion 1.3 for details concerning connecting other external
devices.
WARNING! To avoid temporary or permanent hearing loss or impair-
ment due to unexpected noise or static, always hold your
headphones away from your ears before turning on the
computer. You should also lower your speaker's volume
before testing.
4.
For details on CD-ROM installation refer to Section 1.4.
5.
Replace your computer's cover. Hardware installation is
complete.
III.ii
Please follow the steps below for a proper installation of the
drivers for Windows 95. It is assumed that you already have
Windows 95 installed and have properly plugged in your
Sound Card.
1.
Turn your computer on. The system will boot the Windows
95 operating system.
2.
The Windows 95 Plug-and-Play capabilities will detect the
<Product> card and ask you to install the driver. Select lo-
cation of the driver files (diskette or CD-ROM) click "Fin-
ish".
Hardware Installation
Software Installation
Plug-and-Play 3D Sound Controller
Page ix
Hide quick links:
Advertisement
Table of Contents
