Windows 3.1 Configuration - Ectiva OPTiSound EV1933 User Manual

Plug-and-Play 3D Sound Controller
It is recommended that you select Yes because this file
will have the latest information available about this sound
controller.
12. This concludes the installation. The program will prompt
you to REBOOT your system, be sure to select OK and
then press Ctrl-Alt-Del when prompted. This will insure
that the <Product> Sound Controller is properly config-
ured.
The software installation will then be completed and a new
product group will be visible in Windows. The utilities in this
group allow you to reconfigure the settings of the card and
configure the audio mixer features. Refer to the next section
for more information.
2.2.

Windows 3.1 Configuration

The ECTIVA Audio Driver Setup menu allows you to change
the settings for the ECTIVA Audio Driver in Windows 3.1. To
access this menu, perform the following steps.
1. Double-click the Main program group.
2. Double-click the Control Panel icon.
3. Double-click the Drivers icon.
Page 12