Installing The <Product> Sound Controller - Ectiva OPTiSound EV1933 User Manual

Plug-and-Play 3D Sound Controller
Figure 1-1 Sound Controller Layout
1.2. Installing the <Product> Sound Controller
To install the board:
1. With your computer system's power off, remove the cover,
find an empty 16-bit expansion slot, and remove the metal
bracket.
2. Insert the <Product> Sound Controller into the expansion
slot firmly and evenly (see Figure 1-2). Take care not to
force it into the slot. Once you have properly positioned
the <Product> Sound Controller into the slot, secure the
<Product> Sound Controller with the bracket screw.
Page 2
Speaker Out
Line Out
Game Port/MIDI
Microphone In
MPEG Connect
Wave table synthesizer
CD ROM Connect
CD ROM Audio
Line In