Table of Contents
Advertisement
CHAPTER 2. BUILDING THE CRASH BOBBY
15
The distance piece for the middle sensor is fitted on the screw which projects upwards in
the square plate. The two further distance pieces are placed on the front right and left
corner holes of the base plate and screwed on from below:
The longer M6x20 screws are now required in order to screw the pre-assembled sensors
on to the distance pieces:
The sensors are screwed firmly on to the mounts with the connection facing downwards.
The middle sensor should point exactly straight ahead, while the side sensors should point
outwards at a slight angle:
Advertisement
Table of Contents
