Advertisement
Power Switch with Low Mode
The Power switch has 2 "ON" positions and a forward "OFF" position.
The detector is OFF with the switch in the "UP" position
The detector is ON with the switch in the "MIDDLE" position
The detector is in LOW MODE operation with the switch
in the "DOWN" position.
While in the "Low" position, the detection range will be reduced
You may find the normal mode("ON" position) to be too sensitive.
Unintended detection of nearby large metal masses can be avoided in Low Mode.
Also, if you experience excessive "false" alerts, you may want to reduce sensitivity
using the low mode
LED Indicators
• The GREEN light indicates that the detector is ON
• The YELLOW light indicates LOW BATTERY
• The RED light indicates the detection of a metal object
Power Switch with Low Mode
The Power switch has 2 "ON" positions and a forward "OFF" position.
The detector is OFF with the switch in the "UP" position
The detector is ON with the switch in the "MIDDLE" position
The detector is in LOW MODE operation with the switch
in the "DOWN" position.
While in the "Low" position, the detection range will be reduced
You may find the normal mode("ON" position) to be too sensitive.
Unintended detection of nearby large metal masses can be avoided in Low Mode.
Also, if you experience excessive "false" alerts, you may want to reduce sensitivity
using the low mode
LED Indicators
• The GREEN light indicates that the detector is ON
• The YELLOW light indicates LOW BATTERY
• The RED light indicates the detection of a metal object
Low
OFF
ON
Green
Red
Yellow
Low
OFF
ON
Green
Red
Yellow
4. Silent Operation
Position the Silent/Audio switch in the "Silent/Vibrate" position and:
a) The detector will NOT emit an audible tone upon the detection of metal objects.
b) The vibrator will activate upon the detection of a metal object, and the "Target"
LED indicator will illuminate.
5. Operating Frequency Selection
Chose from two alternate operating frequencies in the event of electromagnetic
interference from other electronic devices. Choice of frequencies is trail-and-error;
if experiencing interference, try alternate frequencies.
6. Low Battery Indication
When battery needs to be replaced, the yellow Low Battery LED will illuminate.
7. Visual Target Response
Red LED flashes when a metal object is located.
8. Comfort Hand Grip
4. Silent Operation
Position the Silent/Audio switch in the "Silent/Vibrate" position and:
a) The detector will NOT emit an audible tone upon the detection of metal objects.
b) The vibrator will activate upon the detection of a metal object, and the "Target"
LED indicator will illuminate.
5. Operating Frequency Selection
Chose from two alternate operating frequencies in the event of electromagnetic
interference from other electronic devices. Choice of frequencies is trail-and-error;
if experiencing interference, try alternate frequencies.
6. Low Battery Indication
When battery needs to be replaced, the yellow Low Battery LED will illuminate.
7. Visual Target Response
Red LED flashes when a metal object is located.
8. Comfort Hand Grip
Advertisement
