Advertisement
OPERATOR DETECTION ALERTS
• Audio alert – High pitch sound
• Vibration alert - silent operation
COMFORT
GRIP
NORMAL & REDUCED
POWER SUPPLY
SENSITIVITY
• Requires (1)
9-Volt battery
LED INDICATORS
(not included)
• Target • Low Battery • Power/On
DETECTOR FEATURES
1. Quick-Change Battery Compartment
Use a coin or screwdriver to open compartment.
Insert circular cam lock and twist to secure in closed position.
2. All-Metal Detection
Detects all types of metals.
Will not detect non-metallic objects.
3. Low Detection
While in the "Low" function mode, the detection range will be reduced.
Use this mode if experiencing false signals or if the normal mode is too sensitive. The very
high sensitivity of the normal mode may cause unwanted detection of large nearby
masses of metal.
OPERATOR DETECTION ALERTS
• Audio alert – High pitch sound
• Vibration alert - silent operation
COMFORT
GRIP
NORMAL & REDUCED
POWER SUPPLY
SENSITIVITY
• Requires (1)
9-Volt battery
(not included)
DETECTOR FEATURES
1. Quick-Change Battery Compartment
Use a coin or screwdriver to open compartment.
Insert circular cam lock and twist to secure in closed position.
2. All-Metal Detection
Detects all types of metals.
Will not detect non-metallic objects.
3. Low Detection
While in the "Low" function mode, the detection range will be reduced.
Use this mode if experiencing false signals or if the normal mode is too sensitive. The very
high sensitivity of the normal mode may cause unwanted detection of large nearby
masses of metal.
INTERFERENCE ELIMINATION FEATURES
• 3 Operating frequency selections
• Minimizes electromagnetic interference
from other devices
INTERFERENCE ELIMINATION FEATURES
• 3 Operating frequency selections
• Minimizes electromagnetic interference
from other devices
LED INDICATORS
• Target • Low Battery • Power/On
Scanning for the Detection of Metal Objects
Always test the detector before operation. Sweep the detector across a known metal object, and
verify detection with audio, vibratory, and visual feedback.
Motion is Required:
area, to detect the presence of metal.
Sweep the detector over the search area, with a smooth, even motion, about 1/2 inch above it.
OPERATING FREQUENCY
Do not make physical contact between the search object and the detector.
7.1 kHz
For maximum sensitivity, sweep the side opposite the control panel closest to the object.
Detection is enabled by magnetic coils which are embedded in the bottom
side of the detector.
This detector will not detect non-metallic objects.
Scanning for the Detection of Metal Objects
Always test the detector before operation. Sweep the detector across a known metal object, and
verify detection with audio, vibratory, and visual feedback.
Motion is Required:
area, to detect the presence of metal.
Sweep the detector over the search area, with a smooth, even motion, about 1/2 inch above it.
OPERATING FREQUENCY
Do not make physical contact between the search object and the detector.
7.1 kHz
For maximum sensitivity, sweep the side opposite the control panel closest to the object.
Detection is enabled by magnetic coils which are embedded in the bottom
side of the detector.
This detector will not detect non-metallic objects.
The metal detector must be IN MOTION, sweeping across the target
The metal detector must be IN MOTION, sweeping across the target
Advertisement
