Mounting On A Table - LG 28LW750H-ZA Owner's Manual

CAUTION
When attaching the stand to the TV
y
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
Make sure that the screws are fastened
y
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
NOTE
Remove the stand before installing the
y
TV on a wall mount by performing the
stand attachment in reverse.
The Rubber will protect the opening
y
from accumulating dust and dirt. When
installing the wall mounting bracket, use
the Rubber. (Only LY751*)

Mounting on a table

1 Lift and tilt the TV into its upright position on
a table.
2 Connect the power cord to a wall outlet.
y
Rubber
2EA
INSTALLATION PROCEDURE
- Leave a 10 cm (minimum) space from
the wall for proper ventilation.
10 cm
CAUTION
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
15