How To Use The Buttons On The Display Panel; Cleaning & Maintenance; Cleaning Your Cooler - NewAir CC-300 Owner's Manual

HOW TO USE THE BUTTONS ON THE DISPLAY PANEL

B F
UTTON UNCTIONS
Raise the desired
temperature.*
* The interior temperature can be adjusted in increments of 1 degree between
54° and 74°F.
After turning on the cigar cooler, the LED display will show the ambient
temperature first, and then the internal cabinet temperature.
After you set the desired temperature, this set temperature will flash for 5
seconds on the display and then revert back to the internal cabinet
temperature.
CLEANING & MAINTENANCE

CLEANING YOUR COOLER

To clean your cooler:
 Unplug the cooler and remove anything inside.
 Remove the shelves and drawers and wash the inside of the unit with a
solution made of warm water and baking soda solution (2 tablespoons of
baking soda to one quart of water).
 Unscrew the water reservoir at the bottom of the unit and rinse with water.
:

http://www.NewAir.com
8


Lower the desired
temperature.*

Turn the light on
or off.