Cisco Nexus 9348GC-FXP NX-OS Hardware Installation Manual page 48

Replacing an AC Power Supply
b) Test the installation by trying to pull the power supply out of the slot without using the release latch.
If the power supply does not move out of place, it is secured in the slot. If the power supply moves, carefully press
it all the way into the slot until it clicks in place.
c) Attach the power cable to the electrical outlet on the front of the power supply.
d) Make sure that the other end of the power cable is attached to the appropriate power source for the power supply.
Depending on the outlet receptacle on your power distribution unit, you might need the optional jumper
Note
cable to connect the switch to your outlet receptacle.
e)
Verify that the power supply is operational by making sure that the power supply
on what the power supply LEDs indicate, see
Cisco Nexus 9348GC-FXP NX-OS Mode Hardware Installation Guide
38
Power Supply LEDs, on page
Replacing Components
LED is green. For information
48.