Advertisement
Quick Links
ROCK SPEAKERS
INSTALLATION GUIDE
2013 COLLECTION
ROCK SPEAKERS
VM Audio Tech Support
US / Canada
phone: (855) audio-99 / (855) 283-4699
email: help@vmaudio.com
© VM Audio All rights reserved. All trade names are registered trademarks of
respective manufacturers listed.
VMROC6
Rev. 1
VMROC6
1. Content
(2) Rock Speakers
2. Routing
1. Choose a permanent location to setup your new VM
Audio outdoor speaker.
2. Pre-route all cables from the amplifier to the location of
the VMROC6 rock speakers.
Note: Keep your VM Audio speakers away from the
sprinkler system or an area where water may collect.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for VM Audio VMROCK6
Summary of Contents for VM Audio VMROCK6
-
Page 1: Installation Guide
2. Pre-route all cables from the amplifier to the location of the VMROC6 rock speakers. Note: Keep your VM Audio speakers away from the sprinkler system or an area where water may collect. © VM Audio All rights reserved. All trade names are registered trademarks of respective manufacturers listed. -
Page 2: Troubleshooting
3. Installation 5. Troubleshooting No Sound • Check that the speakers are connected to the cable correctly. • Check that the speaker cable is connected to the receiver amplifier correctly. • Check that the receiver amplifier is powered “on” at the mains, is not on “mute”, has no headphones attached and that the channels used for the exterior speakers (usually A or B) is in operation.
Need help?
Do you have a question about the VMROCK6 and is the answer not in the manual?
Questions and answers