Cisco Unified Ip Phone 7931G Connections - Cisco 7931G Administration Manual

Cisco Unified IP Phone 7931G Connections

Procedure
Step 1 Connect the handset to the Handset port.
Step 2 Connect a headset to the Headset port. You can add a headset later if you do not connect one now.
Step 3 Connect the power supply to the Cisco DC Adapter port.
Step 4
Connect a Category 3 or 5 straight-through Ethernet cable from the switch to the 10/100 SW port.
Each Cisco Unified IP Phone ships with one Ethernet cable in the box.
Step 5 Connect a Category 3 or 5 straight-through Ethernet cable from another network device, such as a desktop
computer, to the 10/100 PC port.
You can connect another network device later if you do not connect one now.
Related Topics
Before You Begin, on page 1
Phone Cable Lock, on page 7
Network Settings, on page 9
Network and Access Ports, on page 3
Cisco Unified IP Phone Power
Headset, on page 4
Cisco Unified IP Phone 7931G Connections
The following figure and table show how to connect your phone.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
6
Cisco Unified IP Phone Installation