Setting
Enable password
authentication
Operation mode
Maximum number of
connections
Telnet port
32
FTP Server
The FTP Server copies files to and from remote computer system on a network using
TCP/IP. This component also allows users to use File Transfer Protocol (FTP)
commands to work with files, for example, listing files and directories on the remote
system.
Default
Description
and password authentication.
Selected
Specifies whether to use password
authentication. By default, this
component to set to use both
password and NTLM authentication.
Console
Specifies the mode of operation.
Choose one of the following from
the drop‐down box: Console, or
Stream.
Console mode is useful for running
screen‐oriented programs, such as vi
(Visual Interface). Stream mode is
useful for running command‐line
applications.
2
Specifies the maximum number of
simultaneous connections that can
exist to the Telnet server. Set this
value to a number ranging from 0 to
2147483647.
23
Specifies the port number for the
Telnet server to use to make Telnet
connections. Set this port to a
number ranging from 1 to 1023.
To reduce the number of requests to
the Telnet server, set the port
number to a lesser‐known port on
the computer.
Korenix | Supporting Service
9