Korenix JetBox 8180 User Manual page 26

Switch Description
boot.
commit Commits the changes made to the file to the underlying media.
The volume name can either be a case‐insensitive volume device
name (for example, "\\Device\\HarddiskVolume1"), or a drive
letter (for example, "C:" or "D:").
Note that the name is not the volume label that Windows
Explorer displays before the drive letter.
The file path must be an absolute path starting with "\".
Note that the volume must currently be protected. Otherwise, the
error message "The system cannot find the drive specified" is
displayed.
restore Discards the changes made to the file, that is, restores the files to
its original contents from the underlying media.
The volume name can either be a case‐insensitive volume device
name (for example, "\\Device\\HarddiskVolume1"), or a drive
letter (for example, "C:" or "D:").
Note that the name is not the volume label that Windows
Explorer displays before the drive letter.
The file path must be an absolute path starting with "\". It must
be a file. It is acceptable that the file was deleted, in which case it
is recovered.
Note that the volume must currently be protected. Otherwise, the
error message "The system cannot find the drive specified" is
displayed.
? Displays usage and help.
help / [switch] Displays help information for a specific FBWF Manager switch.
If no switch is provided the FBWF Manager displays all the configuration information,
just like the DisplayConfig switch.
The following table describes the input parameters.
Input field Meaning
volumename Full path to a volume
1 Remove exclusion list
0 Preserve exclusion list
path Full file or directory path, including the drive letter.
26 Software Configuration | Korenix