Recovery - Korenix JetBox 8180 User Manual

4­5 Recovery CD
In some severe circumstances, such as when a run‐time image is corrupted, it may be
necessary to start your device from a bootable CD (recovery CD). Korenix provides
the recovery CD of the JetBox to install a new copy of the run‐time image that was
installed onto the JetBox before it left the factory.
Following is the step by step to use the recovery CD:
1. Plug a USB keyboard into the JetBox
2. Plug a USB CD/DVD‐ROM into the JetBox and Insert the recovery CD into the USB
CD/DVD‐ROM
3. Change the BIOS boot device setting of the JetBox
3.1 When the JetBox boots up, press the "Delete" key on the keyboard to enter
the BIOS setting.
3.2 Choose the "Boot Device Priority" item from the "Boot" menu.
3.3 Change the "1st Boot Device" to USB CD/DVD‐ROM, then save and exit BIOS
setting.
4. The JetBox is booted from the USB CD/DVD‐ROM and the recovery procedure runs
automatically.
The Recovery CD runs recovery procedure as following step
28 Software Configuration | Korenix
Figure 1. Start Recovery