Table of Contents
Advertisement
Troubleshooting
Sound okay, picture poor
•
The dipole antenna may not be getting a good signal. Try adjusting its rods. Make sure all of the cables are
firmly connected to the jacks.
•
Try adjusting sharpness function to improve weak signals. Go to page 32 for instructions.
Can't select certain channel
•
Channel may be blocked or not approved in the Parental Controls menu.
•
If using the VCR, make sure the TV/VCR is in the correct mode (press the TV button).
Clock is wrong
•
Power interruption. Need to reset the clock. Go to page 33 for more informtion.
•
Clock was not set accurately (check AM/PM and date). Go to page 33 for more information.
Auto channel search not searching properly
•
The dipole antenna may not be getting a good signal. Try adjusting its rods. Make sure all of the cables are
firmly connected to the jacks.
•
Signal type may not be set properly. If you have cable, make sure the cable type is choosen. Go to page 11
for instructions.
Black box appears on the screen
•
Closed-captioning might be on. Check the Closed-Caption Display control panel in the Screen menu. Go to
pages 32-33 for more instructions.
Closed captions not appearing on screen
•
Closed caption might not be set to on. Go to pages 32-33 for more information.
•
Station might not be broadcasting closed caption.
VCR Playback Problems
Tape plays continuously
•
Auto repeat might be turned on. Go to page 34 for instructions.
Tape plays automatically
•
Auto play might be turned on. Go to page 34 for instructions.
Tape won't insert or eject
•
Make sure you insert the cassette with the window facing up and safety tab facing out.
•
When removing a tape, make sure the TV/VCR is connected to a working outlet.
•
Turn off the TV/VCR, then on before trying to insert or remove tape.
Chapter 4
Other Information
37
Advertisement
Table of Contents
