Table of Contents
Advertisement
DUPLICATING A VIDEO TAPE
If you connect the TV/VCR to another VCR or
Camcorder, you can duplicate a previously recorded
tape. Make all connections before turning on the power.
1
Insert a blank cassette with the erase prevention tab
intact into the TV/VCR.
Insert a previously recorded cassette into the play
back VCR or Camcorder.
2
Press the INPUT button
twice to select AUDIO/VIDEO
input position. The "LINE 2" will
appear on the screen.
NOTE: You can also use the rear AUDIO/VIDEO LINE1
Jacks. Select "LINE 1" by pressing the INPUT
button.
3
Press the REC/OTR button on the remote control of
the TV/VCR, then press the PAUSE button.
4
Press the PLAY button on the playback VCR, then
press the PAUSE/STILL button.
5
Release the recording pause and the playback still
simultaneously to begin the duplicating process.
NOTES: • It is recommended that the tape speed be set
to the SP mode on the TV/VCR for best result.
• Unauthorized recording of copyrighted
television programs, films, video cassettes
and other materials may infringe the rights of
copyright owners and be contrary to copy
right laws.
CONNECTION TO ANOTHER VCR
Playback VCR
LINE 2
To VIDEO
To AUDIO
OUT
OUT
Audio/Video Cord (not supplied)
CONNECTION TO CAMCORDER
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's instruc-
tions. A typical camcorder dubbing hookup is shown
below.
Playback
Camcorder
To AV Jack
Recording TV/VCR
To Video In
Recording TV/VCR
To Video/Audio In
Audio/Video Cord (not supplied)
To Audio In
25
Advertisement
Table of Contents
