Table of Contents
Advertisement
TV OPERATION
MUTING
Press MUTING button to switch
off the sound. The TV/VCR's
sound will be silenced and "MUT-
ING" will briefly appear on the
screen. The sound can be
switched back on by pressing this
button again or one of the VOL + or –
buttons.
CHANNEL + / –
Press and release the CH + or –
button. The channel automatically
stops at the next channel set
into memory. For proper operation,
before selecting channels, they
should be set into the memory.
See pages 15 and 16 "To memorize
channels".
CALL
Press the CALL button. The clock, date, channel number,
real time tape counter, tape speed and VCR operation will
be indicated.
Press CALL button again to disappear the call display.
Current time
8 : 47AM THU
CH 012
HI-FI
00 : 04 : 38 SP
Real Time Counter
HI-FI stereo
NOTE: To listen through the headphones, insert a
headphones (not supplied) with a 1/8" mini plug
into PHONES jack on the front. The sound from
the TV speaker is muted.
SLEEP
To set the TV/VCR to turn off after a preset amount of
time, press the SLEEP button on the remote control.
The clock will count down 10 minutes for each press of
the SLEEP button (120, 110, ...10, 0). After the sleep time
is programmed, the display will appear briefly every ten
minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting,
press the SLEEP button and the
remaining time will be momentarily
displayed. To cancel the sleep timer,
press the SLEEP button repeatedly
until the display turns to 0.
14
VCR operation
: Play
Channel No.
: Reverse
: Forward
Auto Repeat
: Eject
Tape In
: Recording
Tape Speed
: Pause
: Stop
GO BACK
This button allows you to go back
MUTING
to the last channel selected by
pressing the GO BACK button.
Press this button again to return to
the last channel you were watch-
ing.
CAPTION
Press CAPTION button to switch
between normal TV and the two
closed caption modes (captions and
CH 012
screen text). Closed captioning will
display text on the screen for
hearing impaired viewers.
•
NOTES:
If using an indoor antenna or if TV reception
is very poor, the Closed Caption Decoder text
may not appear. In this case, adjust the
antenna for better reception or use an outdoor
antenna.
•
When activating the Closed Captioned
Decoder, there will be a short delay before
the Closed Captioned text appears on the
screen.
•
Closed Captioned text is only displayed in
locations where it is available.
•
If the Call display is on, the Closed Captioning
text will not appear.
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display
Closed Captioned television programs. Closed Captioning
will display text on the screen for hearing impaired
viewers or it will translate and display text in another
language.
CLOSED CAPTIONING WITH A VCR
Closed Captioned programs can be recorded and played
back on a VCR with the Closed Captioned text intact.
The Closed Captioned text will disappear during Cue
(Fast Forward Search), Review (Rewind Search) and
Pause Modes or if the VCR tracking is not adjusted
properly.
TO VIEW CLOSED CAPTIONS
Press the CAPTION button on the remote control to
switch between normal TV and the two Closed Caption
SLEEP
Modes (Captions and Screen Text).
120
CH 012
CAPTION CH 1
Advertisement
Table of Contents
