Installation (For The Installer) - NAYATI NGER 4-60 Installation, Operation And Maintenance Instructions

INSTALLATION (for the installer)

Very important!: Before installing, place the appliance on solid, flat, stable and horizontal surface and
connection availability.
The following instructions are intended for authorized and qualified installer. Before doing installation,
adjustment, and maintenance operations, the installer must follow local and legal regulations.
1. This appliance is using gas. Gas services should be installed according to:
a. Local and international standards
b. Local recommendation, such as building standards and recommendation concern with
combustion
c. Directions and regulations from the gas and power supply companies
d. Regulation concern with prevention accident measures
2. Remove all packaging material and protective coatings.
3. Ensure gas supply is sufficient to operate this appliance.
4. Install the appliance by using Qualified Gas Filter.
5. Before testing, put the appliance in a good ventilated room and keep all flammable material away.
6. Take a leakage test by using soapy water solution. Spread the soapy solution on joints and pipe fitting.
A leakage will be indicated by bubbles comes from the joints or pipefitting. Another way is by looking
at the gas counter. If there is no movement on the gas counter, it means no gas leakage.
7. Before cleaning or maintaining the appliance, please isolate gas supply to the safe place.
8. Install the appliance by following Safe International Gas Standards.
9. If the appliance has not preset to the gas availability, you must convert it into another gas type.
Authorized personnel must do this by referring to the technical data (primary air regulation and
nozzle table), changing the main burner and pilot burner nozzles. Once this has been done, a new
rating data plate should be affixed to the new data by referring to the new gas type.
ORIENTAL
Instructions Manual for Gas Economic Range
NAYATI
32
20141105