Advertisement
Advertisement
Table of Contents
Related Manuals for Electric Fireplaces Direct 2602-CCG
Summary of Contents for Electric Fireplaces Direct 2602-CCG
-
Page 1: Electric Fireplace Insert
Electric Fireplace Insert ASSEMBLY, CARE & USE INSTRUCTIONS MODEL # 2602-CCG MODEL # CS-26MIR MODEL # CS-33IR MODEL # CS-33CG-IR Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-571-1044 8 a.m. - 8 p.m., EST, Monday - Friday. - Page 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 3: Important Instructions
SAFETY INFORMATION (CONT’D) IMPORTANT INSTRUCTIONS When using electric appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: WARNING • l l a • DO NOT plug the power cord into a source of power during unpacking and assembly. -
Page 4: Grounding Instructions
SAFETY INFORMATION (CONT’D) • If possible, ALWAYS unplug this appliance when not in use. • DO NOT use outdoors. • This item is not intended for use in bathrooms, laundry areas and similar indoor locations. NEVER place heater where it may fall into a bathtub or other water container. •... -
Page 5: Operating Instructions
OPERATING INSTRUCTIONS 8:88 To use the remote control, first insert two AAA batteries (included) into the remote 8:88 control. ensuring the poplarities of the battery match the inside of the battery compartment. Note: The control panel is a touch screen. It will appear black. Touch the control panel once to “wakeup: the controls. - Page 6 OPERATING INSTRUCTIONS (CONT’D) Timer Function • Press the TIMER ICON to set the countdown for the unit’s main power. • If the unit is powered OFF, you can press the TIMER ICON to power ON the unit. The emberbed will glow at the lowest brightness setting unless a different setting was saved in the memory.
-
Page 7: Care And Maintenance
CARE AND MAINTENANCE • Make sure the unit is turned OFF, unplugged and the heating elements of heater are cool whenever you are cleaning the heater or fireplace. • Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim. -
Page 8: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Error E1 displayed on The overheat sensor Unplug unit, wait 15-20 minutes, then the sensor will reset control panel. has been engaged. itself. Plug the unit back in and turn on the heater. If the problem persists, call customer service. -
Page 9: One-Year Limited Warranty
ONE-YEAR LIMITED WARRANTY The manufacturer warrants that your new Electric fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. Install and operate this Electric fireplace in accordance with the installation and operating instructions furnished with the product at all times. -
Page 10: Replacement Parts
REPLACEMENT PARTS For replacement parts, call our customer service department at 1-855-571-1044, 8 a.m. - 8 p.m., EST, Monday - Friday. Model # 2602-CCG; CS-26IR PART DESCRIPTION PART # Remote Control PU16-262833-RC Thermostat PU16-232628-NTC Heater / Blower Assembly PU16-23262833-HB Spinner Motor...
Need help?
Do you have a question about the 2602-CCG and is the answer not in the manual?
Questions and answers
Everyt6 is working except the flame spindle is not turning
How do I clean the inside of the glass?