Operation - RCA 01A02 Owner's Manual

OPERATION

1. Turn
VOLUME
2. Press
POWER
3. Set
TUNER CD/TAPE PHONO
source you want to listen to or record
from.
4. If the sound source is monaural, press
in . If the sound source is stereo,
MONO
leave the button in the out position.
Note: The mono button setting also
affects tape recording.
5. For private listening, connect a
headphone's 1 /
amplifier's
PHONES
Caution: To protect your hearing,
follow these guidelines when you use
headphones:
• Set the volume to the lowest setting
before you begin listening . After you
begin listening, adjust the volume to
a comfortable level.
to .
MIN
. The red indicator lights.
to the
-inch mini plug into the
8
jack.
• Do not listen at extremely high
volume levels. Extended high-
volume listening can lead to
permanent hearing loss.
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a
volume level that does not cause
discomfort might still damage your
hearing.
Note: The amplifier mutes the speakers
when you connect headphones. If you
want to listen through the speakers
again, unplug the headphones.
6. Start the sound source.
7. Adjust
VOLUME
as desired.
BALANCE
8. When you finish using the amplifier,
press . The indicator turns off.
POWER
, , and
TONE
5