Table of Contents
Advertisement
CONNECTION
Refer to this diagram for connections:
(1) This 10.7MHz IF OUT socket provides output to drive the optional AOR SDU5600 Spectrum
Display unit, with +/- 5MHz of bandwidth.
(2) Headphone socket (3.5mm mono jack, also wired for stereo plug). When this socket is used,
any external speaker connected to socket (3) will be automatically disconnected.
(3) External speaker socket (3.5mm mono). The speaker should have a nominal 8 Ohm
impedance and power handling of 2 Watts or greater.
(4) Accessory socket. Provides output for audio and discriminator, or other applications you
might create. Pin allocation as follows:
Values for pins 2,6,7 are for a 3kHz FM deviation at antenna input level.
(5) RS-232C socket for PC control. The connection cable is not supplied. Please note that the
socket name ´REMOTEµ will be changed on production units, to a more suitable name.
(6) USB socket for PC control. The connection cable is not supplied.
Advertisement
Table of Contents
