To reduce fire or
shock hazard, do not
expose this receiver
to rain or moisture.
Note to Cable TV Installer:
Note to Satellite Dish Installer:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
RISK OF ELECTRIC SHOCK
PARTS INSIDE. REFER SERVICING TO QUALIFIED
DO NOT OPEN
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock or
To prevent electric shock, match wide blade of plug to slot, fully
Pour éviter les chocs électriques, introduire la lame la plus large de
la fiche dans la borne correspondante de la prise et pousser jusqu'
Do not stack electronic components or other objects on top of
the DSS Receiver. The slots on top of the receiver must be left
uncovered to allow proper airflow to the unit. Blocking the airflow to
the unit could impair performance or damage your receiver and other
Do not stack the DSS receiver on top of a "hot component" such as an
audio power amplifier.
Do not defeat the safety feature of the plug. The wire blade fits into the
wall socket only one way. If you need an extension cord, make sure it
matches the plug of the receiver/decoder.
FCC Regulations state that unauthorized changes or modifications to
this equipment may void the user's authority to operate it.
This reminder is provided to call your attention to Article 820-40 of the
National Electrical Code (Section 54 of the Canadian Electrical Code,
Part 1) which provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of cable entry as
This reminder is provided to call your attention to Article 810 and in
particular article 810-15 of the National Electrical Code which covers
proper installation and grounding of television receiving equipment as
well as to article 820-40 of the National Electrical Code which specifies
that the satellite dish cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
This symbol indicates