Table of Contents
Advertisement
Setting Up the Remote
Programming the remote to control a cable box
Programming the remote to control a laserdisc player
38
Follow these steps to program the ALT button to control a cable box
1. Turn on the cable box.
2. Look up your brand and its code number(s) on code list on
page 41.
3. Press and hold the ALT button.
4. Press and release the DSS button.
5. Enter the three-digit code from the code list.
6. Release the ALT button and press POWER or CHAN UP or
DOWN to see if the cable box responds to the remote
commands.
7. Repeat these steps using the next code listed for your brand
until the cable box responds to the remote commands.
For easy reference, record your cable box code here.
Follow these steps to program the ALT button to control a
laserdisc player
1. Turn on the laserdisk player.
2. Look up your brand and its code number(s) on code list on
page 41.
3. Press and hold the ALT button.
4. Press and release the VCR button.
5. Enter the three-digit code from the code list.
6. Release the ALT button and press POWER or another button to
see if the laserdisc player responds to the remote commands.
7. Repeat these steps using the next code listed for your brand,
until the laserdisc player responds to the remote commands.
For easy reference, record your laserdisc player code here.
Advertisement
Table of Contents
