Chapter 2: Using The Remote Control; Button Descriptions For Tv Mode; Button Descriptions For Other Modes - RCA 32F650T User Manual

Indicator
ON-OFF
TV
DVD VCR
SAT•CAB AUX AUDIO
INFO
CC
CLEAR MENU
OK
PRESETS SKIP
GUIDE
CH
VOL
MUTE GO
BACK
3
1 2
4
5 6
7 8 9
0
INPUT ANTENNA
REVERSE PLAY FORWARD
RECORD STOP PAUSE
Chapter 2
Graphics contained within this publication are for representation only.

Chapter 2: Using the Remote Control

Button Descriptions for TV Mode

Arrows Used to point to different items in the TV menu and to adjust the menu
controls.
Indicator Indicates the programming mode when programming the remote to
control components. Lights when you press a valid button on the remote. Flickers
when a button is pressed and the batteries are low.
(0-9) Number Buttons Enter channel numbers and time settings directly
through the remote control.
To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press
the two digits and expect a few seconds delay. This is in case you want to enter a
third digit.
CC Toggles closed captioning on and off.
CH + or CH - Scans up or down through the current channel list. Press once to
change the channel up or down; press and hold to continue changing channels.
CLEAR Removes any menu or display from the screen and returns you to normal
viewing.
GO BACK Returns you to the previous channel.
INFO Brings up channel banner; press again to clear the screen.
INPUT Toggles through the available input sources (VID1/SVID1, VID2/CVID2,
CVID3, FRNT, and current channel).
MENU Brings up the Main menu.
MUTE Reduces the TV's volume to its minimum level. Press again to restore the
volume.
OK When in the menu system, selects highlighted items.
ON•OFF When in TV mode, turns the TV on and off. If in another mode (VCR,
DVD, SAT•CAB, etc.), will turn the component on and off.
PRESETS Picture options are reset to original factory settings.
SKIP Press once before changing channels and the TV will go back to the original
channel after 30 seconds. Press repeatedly to add more time.
TV Turns on the TV and puts the remote in TV mode. Also displays current status.
VOL – or VOL + Decreases or increases the TV's volume.

Button Descriptions for Other Modes

AUDIO Places the remote in audio mode to operate a component (such as an
audio receiver, or amplifier receiver) that you've programmed to work with this
button.
AUX Puts the remote in AUX mode. Can also be programmed to operate most
brands of an additional remote-controllable component.
ANTENNA In VCR mode, functions as a TV/VCR button. In SAT•CAB mode,
functions as a TV/receiver button.
DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on the
TV and tune to the correct video input channel.
9